TracStar® 250 Series 2

125mm - 250mm (4" - 10")


The new TracStar® 250 Series 2 has been completely redesigned based on feedback from the field. The Series 2 machines incorporate a new cowling design that aids in heat dissipation — while providing easier access for machine maintenance. An updated electrical system increases the circuit protection and a standard battery disconnect is now incorporated for easy lockout.

Read More
 

Models

Click on a part number for ordering information.


  • TracStar® 250 Series 2

    Standard machine with operator-controlled fusion processes designed to meet regulations in the US and similar markets.

    Includes: fusion machine, facer, heater, insulated heater stand and 8" IPS / 250mm master inserts.

    Description Part Number
    Please select a model to customize.
    Low Force AT2512103
    Starting at

    $59,379.00

Explore

Click on a photo or video below for download options.

Specifications

California Prop 65 Info

Models
AT2512103 Low Force
Weights
Machine 1,917 lbs. (869.5 Kg)
Vehicle 1,620 lbs. (734.8 Kg)
Carriage 3-Jaw - 124 lbs. (56.2 Kg) | 4-Jaw - 247 lbs. (112 Kg) |
Heater 21 lbs. (9.5 Kg)
Facer 44 lbs. (20 Kg)
Shipping Weight 2,345 lbs. (1,063.7 Kg)
Hydraulics
System Pressure 2,000 PSI (137.9 BAR)
Fusion Pressure 1,500 PSI (103.4 BAR)
Hydraulic Reservoir Capacity 8 Gallons (30.3 Liters)
Engine
Power 20 HP
Engine Cooling Liquid Cooling
Engine Fuel Type Diesel
Engine Fuel Tank Capacity 5 Gallons (18.9 Liters)
Engine Operational Fuel Tank Capacity 8 Hours
Engine Starting System Electric
Power
Heater 220-240V, 3,000 Watts, 50 / 60 Hz, 1 Ph
Facer Hydraulic
AC Output 120V & 240V, 60Hz, 15 Amp
Heater Plug type CEE 7/7 (DIN 49441)
Chassis
Frame Welded steel construction
Brake Self-locking
Mobility
Mobility Type Rubber crawler tracks
Transportation Self-propelled
Vehicle Speed 1.5 MPH
Lifting Lift points and lifting assembly
Starting System Electric
Machine Dimensions
Length 97" (2,463.8mm)
Width 53" (1,346.2mm)
Height 53" (1,346.2mm)
Carriage Dimensions
Length 3-Jaw - 30" (762mm) | 4-Jaw - 44" (1,117.6mm) |
Width 30" (762mm)
Height 23" (584.2mm)
Shipping Dimensions
Length 90" (2,286 mm)
Width 60" (1,524 mm)
Height 63" (1,600.2 mm)

Print Specifications

Find A Machine

for

Purchase
Certified McElroy Rental

Downloads

Featured Replacement

Parts & Accessories

Click on a part number for ordering information.

Inserts

Surface hardened for longer life and are serrated for maximum grip.

DataLogger® 7

Tablet, transducer, machine mount, micro SD card, removable battery, screen protector, carrying case and Quick Start Guide.

Part Number Description
DLP0857716 DataLogger 7 - English, Spanish, and Russian

External Bead Remover

Trim the bead created during the fusion process.

Part Number Description
1221101 For 1 ¼" to 6" IPS pipe
1221601 Extra blades for 1221101
1221603 Extra blades for 1810102
1810102 For 4" IPS to 18" OD pipe

Facer Blade Set

Spare facer blades.

Part Number Description
T1208602 Facer Blade Set (4 Blades)

Heater

Heaters have a microprocessor control and a dial thermometer to monitor temperature.

Part Number Description
T2516001 240V

Heater Caddy

The Heater Caddy allows you to use the machine to easily carry the heater with the stand from joint to joint.

Part Number Description
AT808901 Retrofit Kit for TracStar 28/250 machines built before 9/2010
AT808902 Allows the heater and heater bag frame to attach to a TracStar

Hydraulic Extension Hoses

Required for in-ditch fusion.

Part Number Description
1219105 25ft Extension Hose Set (4 hoses)

Hydraulic Fill Cap Lock Out

Lock fill area to prevent tampering and accidental fill of improper fluid types.

Part Number Description
T18P0815322 Hydraulic Fill Cap Lock Out

Low Force Conversion Kit

Converts cylinder force to 400 PSI for more precise fusion pressure control. Includes 600 PSI gauge.

Part Number Description
A1280101 Low pressure conversion kit

Low Profile Rollers

Set includes 2 individual rollers. Case includes 40 complete rollers.

Part Number Description
A1867501 Case (includes 40 complete rollers)

Pipe Support Stand

Height is adjustable to properly support, position and align pipe to be fused.

Part Number Description
906501 28 Pipe Stand
Learn More

PolyHorse®

3 trusses, 3 stanchions, 6 screw jacks, 1 pivot roller support, 2 stationary rollers and wrench.

Part Number Description
1875501 Standard PolyHorse
1875502 PolyHorse with PowerAssist
Learn More

PolyPorter®

Aids in lifting pipe into the fusion machine and also performs as a pipe stand.

Part Number Description
864201 Pipe Stand and Dolly
Learn More

Pyrometer Kit

Pryometer kit for accurately checking surface temperatures of heater.

Part Number Description
A218804 Measures surface temperature of heater

Self-Centering Stub End Holder

Self-centering stub end holder to hold stub end for butt fusion.

Part Number Description
885001 Stub End Holder for 28 and 250 lines of machines

Shipping Container

Part Number Description
SED01218H Shipping container

Soft-Sided Carry Bag

Protect, store and transport inserts and accessories.

Part Number Description
MJQ00648 Soft-Sided Carry Bag

Spare Heater Plate Kit

Heater plates have an anti-stick coating and are required for butt fusion.

Part Number Description
AT2501101 Heater Butt Plate Kit
X

Need Help?

Find the right Acrobat™ package for your job

Get Started

This website uses cookies to ensure you get the best experience. By using our site, you acknowledge that you have read and understand our Privacy Policy, our Terms and Conditions, and agree to the continued use of cookies on this site.